hp laserjet p2055dn printer jam in tray 2

Check printer's power cable to ensure the position of the cable is not interfering with proper seating of duplexer.ģ. For external duplexers: remove & reseat duplexer. If problem goes away, replace duplexer.Ģ. and that piece actually triggered the paper jam.ġ. Sometimes paper will simply stop moving inside the fuser because another piece of paper was picked up too early, etc. Inspect the front half of the paper path for another piece of paper stuck elsewhere in the printer. Inspect the fuser's exit path and the paper diverter on the printer's rear cover for physical wear or damage that would prevent the paper from exiting properly.ħ. If media is within recommended specs, replace the fuser (fuser sleeve is worn and slipping on specialty media.)Ħ. If it is not within recommended specs, change media type. If regular paper prints fine, double-check your specialty media to be sure it is within the printer's recommended specs.

If jams in fuser only occur with specialty media (glossy paper, envelopes, labels, transparencies) try printing a test with regular paper. On the LaserJet 2400 or P3005, remove the fuser and inspect the fuser drive gears inside the printer for wear. Change the swing plate assembly as needed.Ĥ. On the LaserJet 4200, 4240, 4250, 4300, 4350, remove the fuser and inspect the swing plate assembly for wear. Replace fuser and/or main drive assembly as needed.ģ.

On the LaserJet 4, 4+, 5 series printers, remove the fuser and inspect the fuser drive gears for wear, as well as the pivot gear on the main drive gear assembly. If problem goes away, replace fuser, If problem goes away, but printer is noisy, consider replacing fuser and fuser drive gears (swing plate assembly / main gear assembly).Ģ. Does the paper stop somewhere inside the fuser?ġ.

Hp laserjet p2055dn printer jam in tray 2